Produit Obsolète 

• Processor : Intel® Celeron® M Processor 1.0GHz
• System Memory : 1 x 200-pin DDR SO-DIMM, max.1GB (Default 256 MB)
• Pixels : 1024x768
• Contrast Ratio : 500:1 (typ.)
• Brightness : 250 (typ.)
• Viewing Angle : -70~70 (H); -60~60 (V)

System Specification
• Form Factor : 3.5"
• Processor Socket : Socket 479
• Processor : Intel® Celeron® M Processor 1.0GHz
• Front Side Bus : 400 MHz
• System Chipset : Intel® 855GME/ICH4
• System Memory : 1 x 200-pin DDR SO-DIMM, max.1GB (Default 256 MB)
• BIOS : Award 4Mbit
• VGA Controller : Intel® 855GME integrated
• VGA Memory : Shared memory, max.64MB
• LCD Support : 24-bit LVDS (Dual channel)
• Ethernet : Dual Realtek RTL8110SCL Gigabit Ethernet ( inside)
• Audio : Built-in audio + AC97 codec
• IDE : 2 x IDE (UDMA33/66/100)
• I/O Chipset : W83627EHG
• Serial : 1 x RS-232, 1 x RS-232/422/485(inside) *
• USB : 4 x USB (2 x USB inside)
• KB / Mouse Connector : 1 x PS/2 ( inside )
• Watchdog Timer : 256 Levels
• Expansion Slots : 1 x Mini PC (Internal)
• HDD : 2.5 inch 80GB
• OS Optional : Windows XP Professional / Embedded, Linux
• Power Adapter : DC IN 12V
• Environment : Environment & Dimensions
• Temperature : Operating : 0 deg.C to 45 deg.C
• Humiduty : 30% to 90% non condensing
• Cooling : Fan cooling concept
• Shock : Operating:15G, 11ms duration
• Vibration : Operating: 5 Hz ~ 500 Hz/ 1 Grms/ 3 Axis Packing:: 5 Hz ~ 500 Hz/ 2.16 Grms/ 3 Axis

LCD Panel Specification
• Viewable Size Image : 15"
• Active Display Area : 304.128 (H) x 228.096 (V)
• Pixel Pitch : 0.297 (H) x 0.297 (V)
• Pixels : 1024x768
• Contrast Ratio : 500:1 (typ.)
• Display Color : 16.2M (6bits+FRC)
• Brightness : 250 (typ.)
• Viewing Angle : -70~70 (H); -60~60 (V)
• Recommend Resolution : 1024 x 768 @ 60Hz, 75Hz
• Power source AC : 100~240 V, Universal,±10%
• Power Consumption : 25 W typical, normal operation
• Power Management : VESA DPMS Compliant
• Plug Play : VESA DDC 1/2B
• Optional TouchScreen : Resistive

Note : All Specifications are subject to change without prior notice!
*If you use SBC on-board RS485, you need to set appropriate state of RTS line before sending/receiving data in your software program.We offer additional board that can perform auto-direction hardware function