mSATA 3SE-P | INNODISK

Innodisk mSATA 3SE-P is designed as the standard Mini PCIe form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the MO-300 specification which established by JEDEC. Regarding of mechanical interference, Innodisk mSATA 3SE-P absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.

Innodisk mSATA 3SE-P effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

Features

• SATA 6Gb/S interface
• SMART disk health monitoring
• Intelligent error recovery system
• Excellent data transfer speed
• Great I.O.P.S for best system reaction
• Build-in Dram buffer
• Zero mechanical interference
• Anti-vibration mechanical design
• JEDEC standard MO-300 dimension

Specifications :

• Model Name : mSATA 3SE-P
• Interface : SATA III 6.0 Gb/s
• Type : Standard
• Flash Type : SLC
• Pin Definition : mSATA
• Capacity : 4GB~32GB
• Max. Channels : 4
• Sequential R/W (MB/sec, max.) : 460/230
• Max. Power consumption : 1.3 W (3.3V x 390 mA )
• Thermal Sensor : Optional
• External DRAM Buffer : Y
• H/W Write Protect : N
• ATA Security : Y
• S.M.A.R.T. : Y
• Conformal Coating : Optional
• Dimension (WxLxH/mm) : 29.8 x 50.8 x 4.4
• Vibration : 20G@7~2000Hz
• Shock : 1500G@0.5ms
• MTBF : >3 million hours
• Storage Temperature : -55°C ~ +95°C
• Operation Temperature :
  - Standard Grade: 0°C ~ +70°C
  - Industrial Grade. OP: -40°C ~ +85°C