| TECHNICAL CHARACTERISTICS - RF (ATSC 3.0 & ATSC 1.0) |
| Connector In |
1x F-type female – 75 Ω |
| Standards |
ATSC 3.0 (NEXTGEN TV), ATSC 1.0 |
| Sensitivity |
-80 to -5 dBm / 28 to 104 dBμV |
| Frequency range |
40 to 1000 Mhz |
| TECHNICAL CHARACTERISTICS - IP STLTP |
| Connector In |
Based on PC Ethernet |
| TECHNICAL CHARACTERISTICS - for SFN Measurements |
| 1PPS connector In |
1x SMA female – 50 Ω |
| 10 MHz connector In |
1x SMA female – 50 Ω |
| GPS connector In |
1x SMA female – 50 Ω |
| TECHNICAL CHARACTERISTICS - USB |
| Data connector |
1x USB 3.0 type-B |
| Aux. Power connector |
reserved for future use |
| ATSC 3.0 RF MEASUREMENTS (REAL-TIME) |
| Input PLP support |
up to 64 PLPs |
| Graphical display |
Spectrum, Constellations, Channel Impulse Response (Echoes), RF measurements, Bitrates |
| Spectrum |
Shoulders measured if adjacent channel filtering disabled (for analysis at transmission sites) |
| Channel Impulse Response (CIR) |
Echoes detection with TXID decoding (Delay, Level, Distance) |
| Signal Level |
-80 to -5 dBm (0.1 dBm resolution) |
| SNR |
up to 40 dB (0.1 dBm resolution) |
| MER L1-Basic |
up to 40 dB (0.1 dBm resolution) |
| MER L1-Detail |
up to 40 dB (0.1 dBm resolution) |
| MER PLP |
up to 40 dB (0.1 dBm resolution) with PLP ID selection |
| Error rates |
Pre-LDPC BER, Pre-BCH BER, Post-BCH FER, Packet Error Number |
| Modulation parameters |
Complete decoding of L1 information |
| Trends files |
Automatic CSV files, including all available ATSC 3.0 RF metrics |
| ATSC 1.0 RF MEASUREMENTS (REAL-TIME) |
| Graphical display |
Spectrum, RF measurements |
| Signal Level |
-80 to -5 dBm (0.1 dBm resolution) |
| SNR |
up to 40 dB |
| Error rates |
Pre-RS BER, Pre-RS SER, Post-RS WER, Packet Error |
| TS content forward |
TS forward over ASI output connector (1x BNC female – 50 Ω) for analysis with external device (typ. TestTree’s DiviDual ASI) |
| Trends files |
Automatic CSV files, including all available ATSC 1.0 RF metrics |
| ATSC 3.0 CONTENT ANALYSIS (RF & STLTP) |
| Multi-PLP decoding |
up to 4 PLP (HTI), 1 PLP (CTI) – automatic detection |
| ATSC 3.0 Statistics |
Frame & Subframe complete structure and statistics with graphical display |
| Services list |
List display with Service Name, ID, ROUTE Protocol, Manifest decoding, SLS information. ESG, EAS, NRT support |
| Audio/Video display |
Service decoding (unencrypted programs), ROUTE DASH content decoded and played with VLC Media Player (external software) |
| PLP list |
List display with PLP ID, IP components, Signaling |
| Signaling |
Complete decoding of Low Level Signaling (including SLT, RRT, STF, AEAT) |
| Bitrates |
Overall, per PLP, per Service, Padding bitrate |
| Channel usage (Lighthouse) |
% of Channel usage (spectrum allocation), Instantaneous bitrate, Average bitrate |
| STLTP security |
GMAC key list support (up to 4 keys), Total Packets, Authentified Packets, Authentified Packets Error, Unchecked Packets |
| GPS & DRIVE TESTING |
| GPS connector In |
1x SMA female – 50 Ω (magnet-mount GPS/GLONASS L1 antenna provided) |
| GPS information |
GNSS Date, UTC Time, Latitude, Longitude, Altitude, Speed |
| Drive testing |
Trends files creation: CSV or Google KML, manual or automatic, including ATSC 3.0 or ATSC 1.0 RF metrics with GPS information |
| ENVIRONMENT & PHYSICAL |
| Dimensions |
21 x 12 x 3,5 cm |
| Weight |
730g |
| Operating temperature |
-20 to +55 °C / -4 to 131 °F |
| Storage temperature |
-20 to +70 °C / -4 to 158 °F |
| Humidity |
0 to 95%, non condensing |
| Power supply |
USB self-powered (1x USB 3.0 required) |
