| System |
| High Performance |
Intel® 10th Core-i® Processor i7-10700TE (Frequency 2.0GHz, Turbo Boost Frequency up to 4.4GHz), 8-Core,16 Thread Support, 16MB Smart Cache |
| Processor |
| Chipset |
Q470E |
| Memory type |
Up to 64GB SO-DIMM DDR4-2933MHz |
| Expansion Slot |
1 x PCI-E 3.0 x 16 |
| 1 x M.2 B-Key 3042/3052 |
| 1 x M.2 E-Key 2230 |
| 1 x M.2 M-Key 2280/2242 |
| Display |
|
| DP |
Resolution up to 4096 x 2304 @60Hz |
| HDMI |
Resolution up to 4096 x 2304 @30Hz |
| Storage |
|
| Storage Device |
2 x 2.5" Solid State Disk (SSD) |
| 1 x M.2 2280 NVMe |
| Ethernet |
|
| Ethernet |
1 x Intel® I219-LM Giga LAN |
| 1 x Intel® I225-LM Giga LAN |
| Front I/O |
|
| Button |
1 x Power Button |
| Indicator LED |
1 x HDD LED ; 1 x Power LED |
| USB Port |
4 x USB2.0 standard-A connectors |
| SSD Tray |
2 x 2.5 SSD Easy Swap Tray |
| Rear I/O |
|
| Ethernet |
1 x 2.5GbE ; 1 x GbE |
| DP |
2 x DP |
| HDMI |
1 x HDMI |
| COM |
2 x RS232/422/485 |
| USB |
4 x USB3.0 standard-A connectors |
| AUDIO |
1 x Mic-in ; 1 x Line-out |
| Power |
AC-IN Plug or DC-IN Plug by option |
| Power Requirement |
| Power Input |
AC option : |
| 1. 100 to 240V AC-IN, 200W |
| 2. 100 to 240V AC-IN, 200W Redundant |
| DC option : |
| 1. 9~36V DC-IN, 150W |
| 2. 9~36V DC-IN, 150W Redundant |
| Operation System |
|
| Operating System |
Windows 10 64Bit, Linux by option |
| Physical |
|
| Dimension |
440 x 380 x 44mm ( AC or DC or Redundant DC) |
| (W x D x H) |
440 x 440 x 44mm ( Redundant AC) |
| Chassis |
SECC |
| Environmental |
|
| MIL-STD-810 |
Method 501.5, Procedure I (Storage/High Temperature) |
| Method 501.5, Procedure II (Operation/High Temperature) |
| Method 502.5, Procedure I (Storage/Low Temperature) |
| Method 502.5, Procedure II (Operation/Low Temperature) |
| Method 503.5, Procedure I (Temperature shock) |
| Method 507.5, Procedure II (Temperature & Humidity) |
| Method 514.6, Vibration Category 24/Non-Operating (Category 20 & 24,Vibration) |
| Method 514.6, Vibration Category 20/Operating (Category 20 & 24,Vibration) |
| Method 516.6, Shock-Procedure V Non-Operating (Mechanical Shock) |
| Method 516.6, Shock-Procedure I Operating (Mechanical Shock) |
| Option : MIL-STD-167-1 / MIL-STD-901 |
| EMC |
EN 61000-4-2: Air discharge: 8 kV, Contact discharge: 6kV |
| EN 61000-4-3: 10V/m |
| EN 61000-4-4: Signal and DC-Net: 1 kV |
| EN 61000-4-5: Leads vs. ground potential 1kV, Signal und DC-Net: 0.5 kV |
| CE and FCC |
| MIL-STD-461 (Options): |
| CE102 basic curve, 10kHz - 30 MHz |
| RE102-4, (1.5 MHz) -30 MHz - 5 GHz |
| RS103, 1.5 MHz - 5 GHz, 50 V/m equal for all frequencies |
| Operating Temperature |
-40 to 60°C (W/O Fan) |
| -40 to 85°C(W/ Fan, under 36 dB) |
| Storage Temperature |
-40 to 85°C |
| Relative Humidity |
5% to 95% , non-condensing |
