| System |
| CPU |
NXP i.MX 8M Plus (default), 4 x Cortex-A53, comes with an integrated neural processing unit (NPU) that delivers up to 2.3 TOPS. Industrial grade CPU runs at 1.6GHz, and commercial grade CPU runs at up to 1.8GHz. |
| |
(i.MX 8M Plus series CPU optional) |
| Memory |
2GB LPDDR4 (1GB/4GB optional, while 8GB is optional when operating temp. is -20°C to 70°C) |
| Flash |
Onboard 16GB eMMC (8GB/32GB/64GB/128GB optional) |
| OS |
Ubuntu20.04, Android11, Yocto-L5.10.72_2.2.0, Windows 10 IoT Enterprise |
| |
Note: 4GB and 8GB LPDDR4 supports Windows 10 IoT Enterprise, we recommend the 8GB version. |
| I/O Interfaces |
| Ethernet |
2 x Gigabit Ethernet controller, one of them supports Time Sensitive Networking (TSN) |
| Display |
1 x HDMI 2.0a, support 3840 x 2160@30Hz, 1920 x 1080@120Hz, 1920 x 1080@ 60Hz |
| |
1 x LVDS, support 4Lane and 8Lane |
| |
1 x MIPI DSI, support 2560 x 1080@60Hz |
| Camera |
2 x MIPI CSI |
| Audio |
Up to 6 x SAI (synchronous audio interface), HiFi4 DSP, 1 x SPDIF IN, 1 x SPDIF OUT |
| |
(Note: 1 x SAI with 8 TX and 8 RX lanes, 1 x SAI with 4 TX and 4 RX lanes, 2 x SAI with 2 TX and 2 RX lanes, 2 x SAI with 1 TX and 1RX lane, all SAIs support I2S and AC97) |
| USB |
2 x USB 3.0, configurable as device or host |
| UART |
Up to 4 x UART |
| I2C |
Up to 6 x I2C, I2C2~I2C6 are exposed to the connectors (2 of the five I2Cs are multiplexed as SD1). I2C1 is not allowed to be configured. |
| SDIO |
2 x SDIO |
| SPI |
Up to 3 x ECSPI |
| PCIe |
1 x PCIe Gen3 |
| CAN |
2 x CAN |
| GPIO |
13 x GPIO for default, other functional pins can be configured as GPIO through software |
| Power Supply |
| Input Voltage |
3.5V~5V |
| CPU Operating Temperature |
|
| Commercial |
0℃~95℃ |
| Industrial |
-40℃~105℃ |
| Mechanical |
| Connector |
4 x Double-sided board-to-board connector (model number BB51024A-R80-10-32), 2 x 40pin/0.5mm pitch, matching sockets of various heights |
| Dimension |
60mm(L) x 40mm(W) x 5.6mm(H) |
| DEBIX SOM A I/O Board Specification: |
|
| System |
| Core Board |
DEBIX SOM A |
| Boot |
(1) Support boot from eMMC on DEBIX SOM A |
| (2) Support boot from Micro SD on carrier board |
| (3) Support boot from SPI Nor Flash on carrier board |
| Video & Audio |
| HDMI |
1 x HDMI output, Type-A female socket |
| LVDS |
(1) 1 x Dual-channel LVDS output, support single-channel 8bit and dual-channel 8bit output (2*15Pin/2.0mm pin header) |
| (2) 1 x Backlight control connector (1*6Pin/2.0mm pin header) |
| (3) 1 x I2C touch panel connector (1*6Pin/2.0mm pin header) |
| MIPI DSI |
1 x 4Lane MIPI DSI (2*10Pin/1.25mm pin header) |
| MIPI CSI |
2 x 4Lane MIPI CSI (2*10Pin/1.25mm pin header) |
| Audio |
(1) 1 x Headphone and mic combo port, 3.5mm socket, compatible with built-in header design |
| (2) 1 x Line in, analog input |
| (3) 1 x L&R speaker output, Max. 3W@4Ω (1*4Pin/2.0mm pin header) |
| (4) 1 x SPDIF TX/RX audio connector (1*4Pin/1.25mm pin header) |
| Communication |
| Ethernet |
2 x Independent MAC Gigabit RJ45 port with POE power supply (need POE power device module) |
| WIFI & BT |
2.4GHz & 5GHz Wi-Fi and Bluetooth 5.0, external SMA antenna connectors for Wi-Fi and 4G |
| Other I/O Interfaces |
|
| SIM Slot |
1 x Micro SIM slot, push pop-up slot |
| SD Slot |
1 x Micro SD slot, push pop-up slot |
| Mini PCIe |
(1) Support 4G Mini PCIe module such as Quectel 4G Module, built-in SIM card, etc. |
| (2) Support LoRa Mini PCIe module |
| (3) Support Mini PCIe expansion for network card, SATA and serial port |
| USB 3.0 |
4 x USB 3.0 Host, double-layer Type-A interface |
| USB 2.0 |
3 x USB 2.0 Host (1*4Pin/2.0mm pin header) |
| Serial Ports |
(1) 6 x Isolated RS232/RS485 (you can choose only one of two), compatible with UART TTL 3.3V without isolation |
| (2) 1 x UART TTL 3.3V system debug port |
| GPIO |
(1) 4 x Isolated DI, support dry contact and wet contact |
| (2) 4 x Isolated DO, support wet contact, compatible with dry contact of external relay |
| CAN |
2 x Isolated CAN |
| LED & Key |
(1) 1 x Power LED |
| (2) 2 x Programmable LED |
| (3) 1 x ON/OFF |
| The above interfaces share one connector (1*6Pin/2.0mm pin header) |
| (4) Built-in small key for eMMC upgrade without disassembly |
| DC Jack |
(1) 1 x DC jack for 5.5mm x 2.1mm DC plug |
| (2) 1 x Built-in power supply connector (1*4Pin/2.54mm pin header) |
| Power Supply |
| Power Input |
DC 12V for default, support wide voltage range of DC 12V~36V |
| Mechanical |
| Dimension |
146.0mm x 102.0mm |
