Official EVM Baseboard for EDM Type II Modules : Wizard | TECHNEXION

The official EDM Evaluation board brings you a rich variety of interfaces and options at your fingertips.

With all interfaces backed up with switches and easy to access test points you can by-pass or disable any interface to quickly attach 3rd party chip solutions to validate their hardware and software integration compatibility.

System :

• System on Module : Compatible with EDM Type II Compact, Standard and Extended
• RTC : backup battery and 3.3V direct input
• Environment Sensors :
  Onboard 3 axis movement sensor
  Onboard light sensor
• Interfaces :
• Connector
  2x USB host
  1x mini-USB OTG 2.0/3.0
  1x gigabit LAN
  2x SATA
  1x SD cardslot
  Stereo audio in/out/microphone/SPDIF
  2W amplified speakers
  2x LVDS 4 wire / 5 wire touchpanel
  2x HDMI
• Header :
  1x USB host
  8x GPIO
  SPI
  2x UART (RS-232/422/485)
  2x CAN bus
  2x I2C 2x SPI
  LPC (low pincount)
  Reserved pins/manufacturing pins
• Expansion slots
  2x mini-PCIe + SIM cardslot (for 3G communication)
  1x PCIe x1 expansion slot (shared with mini-PCIe cardslot PCIe x16 expansion slot)

Power :

• Input power : 6~32 VDC wide voltage input
• Smart battery : Optional battery support with expansion module

Mechanical and Environmental :

• Temperature : 0° to 60° C
• Humidity : 10-90%
• Form Factor : mATX board
• Dimensions :
  244 x 244 mm
  9⅝ x 9⅝ inch
• MTBF : >50,000 hours
• Weight : 650 grams
• Shock : 50G / 25ms
• Vibration : 20G / 0-600 Hz

Dimensional drawing :
all sizes in mm