Agrandir l'image

Sonde différentielle 70 MHz : TT-SI 9071 | TESTEC ELEKTRONIK

Bandwidth DC to 70 MHz (-3 dB) Attenuation Ratio x10 / x100 DC-Accuracy ±1 % Input Impedance 4 MΩ, 5.5 pF each side to ground Rise Time 5 ns Measurement Category CAT III Max. Amplitude ±7 V (into < 5 kΩ load) Offset <±5 mV Noise (typical) 2 mVrms Source Impedance (typical) 50 Ω (for using 1...

Bandwidth	DC to 70 MHz (-3 dB)
Attenuation Ratio	x10 / x100
DC-Accuracy	±1 %
Input Impedance	4 MΩ, 5.5 pF each side to ground
Rise Time	5 ns
Measurement Category	CAT III
Max. Amplitude	±7 V (into < 5 kΩ load)
Offset	<±5 mV
Noise (typical)	2 mVrms
Source Impedance (typical)	50 Ω (for using 1 MΩ input system oscilloscope)
CMRR (typical)	-80 dB @ 50 Hz, -60 dB @ 20 kHz -46 dB @ 1 MHz, -40 dB @ 10 MHz
Input Voltage Differential Mode	x10 ±70 V (DC + peak AC) or 70 Vrms x100 ±700 V (DC + peak AC) or 700 Vrms
Input Voltage Common Mode	x10 ±700 V (DC + peak AC) or 700 Vrms x100 ±700 V (DC + peak AC) or 700 Vrms
Input Voltage Absolute max. Voltage	x10 ±1400 V (DC + peak AC) or 1000 Vrms x100 ±1400 V (DC + peak AC) or 1000 Vrms
Power requirements	4x AA Cells or Mains Adaptor 6 VDC / 100 mA or regulated9 VDC / 70 mA
Dimensions (L x W x H)	170 mm x 63 mm x 21 mm
Cable	BNC Cable 95 cm Input Leads 45 cm
Weight	400 g (Probe and PVC-Jacket included)