Description
Ces 4 micro-pompes à engrenage sont principalement utilisées dans les applications labo.
Elles se caractérisent par un moteur sans brosse et une tête de pompe en acier inox.
Caractéristiques :
1. WT3000-1JA Micro Gear Pump
- Acceptable pump heads: MG204, MG209, MG213
- Operating mode: Membrane keypad
- Prime function for fast filling and emptying
- Display: 4 digits LED displays the speed of the pump, two LED lights indicate the running status and external control status.
- External input functions: Control the start/stop and the speed of the pump.
- Footswitch: Control the start/stop of the pump
- Communication function: Realize computer control through RS485 INTERFACE.
- Memory functions: Store the running parameters automatically.
- Cooling mode: Heat-emitting fan
- Running directions: Clockwise only
2. WT3000-1JB Micro Gear Pump
- Acceptable pump heads: MS204, MS209, MS213
- Suitable to transfer viscous, high temperature fluids or transfer the fluids in pressure condition
- Compact size, noiseless, pulsation-free
- 4 digits LED displays the speed of the pump
- Combine the knob and rotary encoder switch to make the operation easy
- Prime function for fast filling and emptying
- The start/stop and speed of the pump can be controlled through external control port
- Store the running parameters automatically
3. WT3000-1FA Micro Gear Pump
- Acceptable pump heads: MG204, MG209, MG213
- Flow rate function: Deliver the liquid according to the set flow rates.
- Dispensing function: Dispensing volume, cipy number and pause time can be set.
- Calibration function: The flow rates and the dispesning volume can be calibrated to increase the accuracy.
- Operating mode: Membrane keypad
- Prime function for fast filling and emptying
- External control input: Control the flow rates and start/stop of the pump
- External control output: Output start/stop and speed signal.
- Footswitch: Control the start/stop of the pump
- Communication function: Realize computer control through RS485 interface.
- Memory function: Store the running parameters automatically.
- Cooling mode: Heat-emitting fan
- Running directions: Clockwise
4. WT3000-1FB Micro Gear Pump
- Acceptable pump heads: MG/MS204, MG/MS209, MG/MS213
- Suitable to transfer viscous, high temperature fluids or transfer the fluids in pressure condition
- Compact size, noiseless, pulsation-free
- Dispensing volume, copy number and pause time can be set
- Flow rates and dispensing volume can be calibrated for higher accuracy Combine the membrane keypad and rotary encoder switch to make the operation easy
- Prime function for fast filling and emptying
- The pump has external control input and output ports
- Store the running parameters automatically
- Decoupling will occur when the pump load exceeds the maximum coupling torque provided by the alignement of the two magnets
Spécifications :
WT3000-1FB Micro Gear Pump
- Flow rates: 85.7 - 2571.4 mL/min
- Speed: 300 - 3000 rpm
- Speed accuracy: ±1%
- Speed resolution: 1.0 rpm
- Dispensing volume: 0.1 mL 999 L
- Copy number: 0 9999 "0" means unlimited cycle
- Pause time: 1s to 999 hours, resolution: 0.1s
- Flow rate calibration time: 30-1800 seconds, resolution: 1s
- Communication: RS485
- Diameter of particale in liquid: ≤10μm
- Max. outlet pressure: MG204 - 0.8Mpa, MG209 - 0.8Mpa, MG213 - 0.3Mpa
- Liquid temperature range: -45-50 ℃ with PTFE gear, -45-120℃ with PEEK gear.
- Viscosity of liquid: ≤200 CST
- External input control: Flow rate control (4-20 mA, 0.5-5V, 1.0-10V, 1.0-10KHz), start/stop control.
- External output control: 1.25-12.5kHz frequency output corresponding to 300-3000 rpm; start/stop status output
- Power supply: AC 220/110V 2 0%, 50Hz/60Hz
- Power consumption ≤150 W
- Operating condition: Temperature 0 to 40℃, Relative humidity < 90% (no dew)
- Drive Weights: 5.1 kg
- Drive Dimensions: 290×207×180 (mm) (L×W×H )
- IP Rating: IP31
