Close
Menu

NOS SERVICES

LA SOCIÉTÉ

INFORMATION

01 47 95 99 89
| CONSEIL D'EXPERTS TECHNIQUES | DISTRIBUTEUR DEPUIS 1963
Driver de LED (12W ~ 100W), boîtier plastique, IP67 : Série GP-CVP Agrandir l'image

Driver de LED,12W , boîtier plastique, IP67 : Série GP-CVP012N | GLACIAL POWER

Consommation à vide < 0,5W à 230 VAC

Plus de détails

Téléchargement

Documentation Série GP-CVP

Téléchargez ce fichier (517.82k)

Description

Caractéristiques :

  • Plage d'entrée AC universelle 90 ~ 264 VAC
  • Conception d'alimentation de classe II sans broche de mise à la terre
  • Conception à tension constante. (mode CV)
  • Boîtier plastique entièrement isolé
  • Protections : OCP/SCP
  • Size 75.3 x 36 x 24 mm (L x W x H)
  • Consommation à vide < 0,5W à 230 VAC
  • IP67

Références et spécifications :

Model No. GP‐CVP012N‐12V‐P02 GP‐CVP012N‐24V‐P02
Output DC Voltage Range 12V 24V
Rated Current 0‐1000mA 0‐500mA
Rated Max. Power 12W 12W
Voltage Tolerance ± 5% ± 5%
Ripple & Noise (Max.) note.2 180 mVp‐p 240 mVp‐p
Efficiency (Min) 81% at 230VAC full load 83% at 230VAC full load
Set up Time (Max) < 1S / 115VAC at full load / < 0.5S / 230VAC at full load
Input Rated Voltage 100 ~ 240VAC       141 ~ 340VDC
Voltage Range 90 ~ 264VAC
Frequency Range 47 Hz ~ 63 Hz
AC Current (Max.) 0.3A at 115VAC /0.15A at 230VAC
Inrush Current (Max.) ≤ 30A at 115VAC / ≤ 40A at 230VAC
Leakage Current < 0.25mA / 240VAC
No Load Consumption < 0.5W at 230VAC
Protections Over Current 110% ‐ 150% Constant current limiting, auto‐recovery
Short Circuit Hiccup mode, recovers automatically after fault condition is removed
Environment Operation Temp. ‐10°C ~ 50°C full load (Refer to output load derating curve)
Operation Humidity 20% ~ 90% RH non‐condensing.
Storage Temp & Humidity ‐20 ~ +80°C ,10% ~ 90% RH
Safety & EMC Safety Standards EN61347‐1,EN61347‐2‐13;
Withstand Voltage I/P ‐ O/P: 3.75K VAC
EMI Conduction & radiation meet Compliance to EN55015;    FCC PART15 CLASSB
EMS immunity meet Compliance to EN61000‐4‐2,3,4,5,6,11;EN61547
Connection Input UL rated, 20 AWG x 2 C ( 150 mm)
Output UL rated, 20 AWG x 2 C ( 150 mm)
Others MTBF 200K hours min. @Ta=25 °C
Dimension(L x W x H) 75.3 x 36 x 24 mm;    97.4g/pcs
Note 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C ambient temperature.
2. Ripple & Noise are measured at 20MHZ bandwidth oscilloscope and with 0.1uF & 47uF parallel capacitor.
3. The power supply is considered a component which will be installed a final equipment. The final equipment must be re‐confirmed that it still meets EMC directives.
Conseils et Préconisations Conversion d'énergie
Demarche commerciale
Expertise
Veille et Suivi
Sur Mesure

26 autres produits dans la même catégorie

Close