| Model No. |
GP‐CVP100P‐12V‐P02 |
GP‐CVP100P‐24V‐P02 |
GP‐CVP100P‐36V‐P02 |
GP‐CVP100P‐48V‐P02 |
| Output |
DC Voltage |
12V |
24V |
36V |
48V |
| Rated Current |
0~8.3A |
0~4.2A |
0~2.8A |
0~2.1A |
| Rated Power |
99.6W |
100.8W |
100.8W |
100.8W |
| Ripple &Noise (Max.) Note.2 |
200mV |
200mV |
360mV |
480mV |
| Efficiency at 230VAC (Typ.) |
88% |
90% |
90% |
90% |
| Voltage Tolerance Note.3 |
± 5% |
± 5% |
± 5% |
± 5% |
| Set up time (Max.) |
≦0.5S at 230VAC, full load. |
| Input |
Rated Voltage |
100 ~ 240VAC 141~340VDC |
| Voltage Range |
90 ~ 264VAC |
| Frequency Range |
47 Hz ~ 63 Hz |
| AC Current (Max.) |
1.1A at 115VAC / 0.52A at 230VAC |
| Power Factor |
>0.98 at 115VAC / >0.95 at 230VAC, full load. |
| Total Harmonic Distortion |
THD < 12% at 230VAC, full load |
| Inrush Current (Typ.) |
Cold Start 55A (Td=450us measured at 50% Ipeak) at 230VAC |
| Max. Number of PSUs on Circuit Breaker |
B type : 3 unit (10A) /5 unit (16A) / 7 unit (25A),
C type : 5 unit (10A) / 8 unit (16A) / 13 units (25A),
D type : 16 units (16A) / 26 units (25A) at 230VAC |
| Leakage Current |
<1mA at 240VAC |
| No‐load power consumption |
0.20W Typ. |
0.30W Typ. |
0.40W Typ. |
0.45W Typ. |
| Protections |
Over Current |
9.13A~12.45A |
4.62A~6.3A |
3.08A~4.2A |
2.31A~3.15A |
| Type: Hiccup mode (Auto recover after fault condition disappeared). |
| Short Circuit |
Type: Hiccup mode (Auto recover after fault condition disappeared). |
| Over Voltage |
13.2V~18V |
26.4V~36V |
39.6V~54V |
52.8V~72V |
| Type: Hiccup mode (Auto recover after fault condition disappeared). |
| Over Temperature |
Tcase: 90°C ± 10°C |
| Type: Shut down output , recovers automatically after temperature goes down. |
| Environment |
Operation Temp. |
‐20°C ~50°C (Refer to output load derating curve). |
| Operation Humidity |
20% ~ 90% RH non‐condensing. |
| Storage Temp. |
‐40 ~ +80°C |
| Storage Humidity |
10% ~ 90% RH |
| Vibration |
10~500 Hz, 2G 10 min./1 cycle, period for 60 min. each along X, Y, Z axes. |
| Safety& EMC |
Safety Standards |
EN61347‐1, EN61347‐2‐13, independent. |
| Withstand Voltage |
I/P‐O/P: 3.75KVAC |
| Isolation Resistance |
I/P‐O/P :100M ohms / 500V DC at 25°C |
| EMI Conduction & Radiation |
Compliance to EN55015 |
| Harmonic Current |
Compliance to EN61000‐3‐2 Class C(100% load), EN61000‐3‐3 |
| EMS Immunity |
Compliance to EN61000‐4‐2,3,4,5,6,8,11; EN61547, criteria B |
| Others |
MTBF |
100K hours min. MIL‐HDBK‐217F(25°C) |
| Dimension(L x W x H) |
188 x 53.6 x 32mm; 640 g/pcs |
| Note |
1. All specifications not specially mentioned are measured at 230VAC full load and 25°C ambient temperature.
2. Ripple & Noise are measured at 20MHz bandwidth by using a 12" twisted pair‐wire terminated with 0.1uf & 47uf parallel capacitor.
3. Voltage Tolerance: includes line regulation, load regulation and set‐up tolerance.
4. The power supply is considered a component which will be installed a final equipment. The final equipment must be re‐confirmed that it still meets EMC directives. |
